Environment friendly material
Thermoforming
Non Porous & Homogenous
Easy maintenance repair
Consistent quality standard
Heat & Stain Resistant
Impact Resistant

PLEASE VISIT
OUR SHOWROOM :

Jakarta Design Center
4 th. Floor SR no. 18 - 19
Jl. Gatot Soebroto Kav. 53 - Slipi
Jakarta 10260

PROJECT
COMMERCIAL PROJECT

details...

BAHASA | ENGLISH

ACRYLICSTONE    |    Physical Properties

Testing Result
No Test Item Requirements
Result
1
Appearance Collor Gloss Uniform colour gloss without obvious colour difference.
Pass
Plate Edge Fine level without deformity surface.
Pass
Texture Clears design and texture. Special requirement should be conferred between provider and user.
Pass
Surface Smooth face without ripple, nick, crack, air-bubble and impurity.
Pass
2
Barcrol hardness PMMA : ? 58
58
3
Load Performance There should be no nreak after test. and the max reminder flexibility should be less than 0.25 mm.
Pass
4
Ball Impact resistance No break and fragment on surface (diameter 38.1 mm. 0.225 kg. 610 mm).
Pass
5
Stain resistance Total stain index should be less than 64, and the max deepness of stain should be less than 0.12mm
Pass
6
Charpy impact strength, kj/m² 4
4.1
7
Flexural strength, MPa 40
41.2
8
Modulus of elasticity in fleural, MPa 6500
7.75 x 103
9
Oxygen index, % 35
54.5
10
Cigarette Test The sample should have neither bright-fire inflammation nor non-fire inflammation during touching the cigarette. The sample should be normally although in any damage. And it can be recovered by polishing.
Pass
11
Chemical Resistance(15 kinds of reagent) There should be no distinct damage on surface, and slight damage can be erased by 600 mesh san paper.The sample should be recovered and used normally although in any damage
Pass
12
Heat Resistance The surface should be no break, crack and blister. The sample should be easily recovered by polishing surface disfigurement, and have no effect to the use of plate
Pass
13
High Temperature Resistance The surface should be no break, crack and blister. The sample should be easily recovered by polishing surface disfigurement, and have no effect to the use of plate
Pass
14
Water Resistance The surface of sample should be no break, crack, blister and delamination. And the sounds of knocking should not become dumb
Pass
15
Color Fastness The sample should have no crack, or bubble and difference of quality on surface after aging. The difference color between test-sample and original sample should be less than 2 CIE
Pass